John Deere 6010 Series 6810 Engine PARTS
Cylinder Head Gasket
-
Head Gasket suitable for John Deere - R116516 Head GasketCA$73.36 Inc VAT CA$73.36 Exc VAT1-5 days handlingPart No.50373 -
Head Gasket Set suitable for John Deere - RE526672 Head Gasket SetCA$182.50 Inc VAT CA$182.50 Exc VAT1-5 days handlingPart No.50372
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R123543 Rocker Cover GasketCA$30.88 Inc VAT CA$30.88 Exc VATOut of stockPart No.50223
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mmCA$11.54 Inc VAT CA$11.54 Exc VAT1-5 days handlingPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - R91889 Valve Collet (Pair)CA$7.72 Inc VAT CA$7.72 Exc VAT1-5 days handlingPart No.1614 -
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)CA$3.25 Inc VAT CA$3.25 Exc VAT1-5 days handlingPart No.7407
Valve Ancillaries
-
Exhaust Valve Seat - R85687 suitable for John Deere - R85687 Exhaust Valve Seat suitable for John DeereProduct Info- Inner Diameter: 34mm- Outer Diameter: 43mmCA$13.02 Inc VAT CA$13.02 Exc VATOut of stockPart No.1619 -
Valve Retainer suitable for John Deere - RE31323 RE60005 Valve RetainerCA$32.55 Inc VAT CA$32.55 Exc VAT1-5 days handlingPart No.1615 -
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mmCA$6.51 Inc VAT CA$6.51 Exc VAT1-5 days handlingPart No.1496 -
Valve Tappet suitable for John Deere - T20073 Valve TappetCA$19.53 Inc VAT CA$19.53 Exc VAT1-5 days handlingPart No.1502 -
Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve CapID: 7.75mmOD: 18mmHeight: 12mmCA$6.51 Inc VAT CA$6.51 Exc VAT1-5 days handlingPart No.1616
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 DegreesCA$45.00 Inc VAT CA$45.00 Exc VAT1-5 days handlingPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 DegreesCA$30.99 Inc VAT CA$30.99 Exc VAT1-5 days handlingPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set - RE66087 suitable for John Deere - R501456 RE501456 RE526965 Complete Gasket SetCA$200.07 Inc VAT CA$200.07 Exc VAT1-5 days handlingPart No.53219
Oil Pumps
-
Oil Pump RE504914 suitable for John Deere - RE502269 RE504914 RE59582 Oil Pump.Show MoreCA$275.00 Inc VAT CA$275.00 Exc VAT1-5 days handlingPart No.75570
Piston Engine
-
Piston, Pin & Clips- RE48469 suitable for John Deere - RE48469 RE28920 Piston Length: 120mm
Chamber Depth: 22.02mm.CA$119.02 Inc VAT CA$119.02 Exc VAT1-5 days handlingPart No.1636 -
Piston, Pin & Clips suitable for John Deere - RE55512 Al-Fin Ring.Crown diameter: 104.730mm.Skirt diameter: 106.390mm.Compression height: 71.625mm.Overall height: 104.625mm.Chamber diameter: 56.94mm.Chamber depth: 25.45m... Show MoreCA$113.61 Inc VAT CA$113.61 Exc VAT1-5 days handlingPart No.1602Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.CA$38.50 Inc VAT CA$38.50 Exc VAT1-5 days handlingPart No.1443
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere - R116397 R115336 R116383 Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show MoreCA$64.47 Inc VAT CA$64.47 Exc VAT1-5 days handlingPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604CA$7.08 Inc VAT CA$7.08 Exc VAT1-5 days handlingPart No.1450
Crankshafts
-
Crankshaft RE505921 suitable for John Deere - RE505921 Crankshaft6 Bolt Hole Flywheel FixingMains: 3.1235"/3.064"Conrods: 3.0635"/3.064"Stroke: 5.000"Lip SealHol... Show MoreCA$2,754.01 Inc VAT CA$2,754.01 Exc VAT1-5 days handlingPart No.74254
Crankshaft RE505921 suitable for John Deere - RE505921 Tappered Nose
6 Bolt Hole Flywheel Fixing
CA$3,054.49 Inc VAT CA$3,054.49 Exc VATOut of stockPart No.74246
Crankshaft (Genmot) suitable for John Deere - RE504639 RE515785 RE52850Straight Nose7 Holes flywheel end4 Bolt Holes crank pulley endCA$3,580.20 Inc VAT CA$3,580.20 Exc VAT1-5 days handlingPart No.75501
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - RE65908 Standard SizeCA$26.04 Inc VAT CA$26.04 Exc VAT1-5 days handlingPart No.1607 -
Conrod Bearing Pair +0.010" - John Deere RE65909 suitable for John Deere - RE65909 Conrod Bearing Pair +0.010" - John Deere RE65909CA$26.04 Inc VAT CA$26.04 Exc VAT1-5 days handlingPart No.1607A
Main Bearings
-
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.CA$59.43 Inc VAT CA$59.43 Exc VAT1-5 days handlingPart No.1486
Conrods
-
Conrod suitable for John Deere - R500335 RE500608 RE50770 ConrodSmall End/Pin size ID: 41mm.Big End ID: 82.5mm.Total Length: 312mm.Centre to Centre Length: 203mm.CA$161.12 Inc VAT CA$161.12 Exc VAT1-5 days handlingPart No.72386
Conrod Bolts & Nuts
-
Conrod Bolt - R74195 suitable for John Deere - R56445 R74195 Conrod BoltDimensions- Thread: 1/2UNF x 35- Overall Length: 74.80mmCA$13.48 Inc VAT CA$13.48 Exc VAT1-5 days handlingPart No.75568
Crankshaft Seals
-
Rear Crankshaft Seal suitable for John Deere - AR22965 AR92893 AT22965 Rear Crankshaft Seal.External Diameter:- 146.01MMInternal Diameter:- 117.38MMWidth / Thickness:- 14.35MMCA$54.50 Inc VAT CA$54.50 Exc VAT1-5 days handlingPart No.1461 -
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank SealCA$22.57 Inc VAT CA$22.57 Exc VAT1-5 days handlingPart No.1460 -
Front Crank Seal suitable for John Deere - RE505515 RE516340 RE52346 Front Crank SealCA$41.27 Inc VAT CA$41.27 Exc VAT1-5 days handlingPart No.1606
Oil Filters
-
Oil Filter Spin On suitable for John Deere - RE59754 Oil Filter Spin OnCA$50.68 Inc VAT CA$50.68 Exc VAT1-5 days handlingPart No.10209
Fuel Filters
-
Primary Fuel Filter suitable for John Deere - RE509031 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
CA$64.32 Inc VAT CA$64.32 Exc VATOut of stockPart No.10215 -
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,CA$59.47 Inc VAT CA$59.47 Exc VATOut of stockPart No.FS19861 -
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.CA$50.36 Inc VAT CA$50.36 Exc VATOut of stockPart No.10206 -
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.CA$67.63 Inc VAT CA$67.63 Exc VAT1-5 days handlingPart No.FS19831 -
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show MoreCA$84.25 Inc VAT CA$84.25 Exc VAT1-5 days handlingPart No.FS19840
Fleetguard FS1212 Fuel Filter suitable for John Deere - RE42050 PMFS1212 Overall height: 201mm, OD: 93mm, Thread size: 1 - 14 UNS-2B, UNS-2BCA$71.13 Inc VAT CA$71.13 Exc VAT1-5 days handlingPart No.FS1212
Fleetguard FS19830 Fuel Filter suitable for John Deere - RE509208 RE517181 Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.CA$75.22 Inc VAT CA$75.22 Exc VAT1-5 days handlingPart No.FS19830
Fleetguard FF5850 Inline Fuel Filter - AL153517 suitable for John Deere - AL153517Fleetguard FF5850 in-line fuel filter ensures optimal fuel system protection from contaminants.Media Type: Wire MeshLength: 117.50 mmCA$27.17 Inc VAT CA$27.17 Exc VAT1-5 days handlingPart No.FF5850
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket IncludedCA$43.40 Inc VAT CA$43.40 Exc VAT1-5 days handlingPart No.55008 -
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filterCA$96.50 Inc VAT CA$96.50 Exc VAT1-5 days handlingPart No.1613 -
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket IncludedCA$58.50 Inc VAT CA$58.50 Exc VAT1-5 days handlingPart No.55016
Fuel Pumps Electric
-
Filter Head Fuel Pump suitable for John Deere - RE509530 Filter Head Fuel Pump.Two Metal Prongs Inside Connecting Plug.CA$225.00 Inc VAT CA$225.00 Exc VAT1-5 days handlingPart No.9602 -
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.CA$300.54 Inc VAT CA$300.54 Exc VAT1-5 days handlingPart No.9477
Fuel Injectors
-
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mmCA$0.50 Inc VAT CA$0.50 Exc VAT1-5 days handlingPart No.1512
Fuel Injector Nozzle
-
Injector Seal Kit - RE64292 suitable for John Deere - RE64292 Injector Seal Kit.Suitable for a wide range of John Deere machines fitted with 'Pencil Style' injectors.One kit required per Injector.CA$8.55 Inc VAT CA$8.55 Exc VAT1-5 days handlingPart No.75961
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidCA$76.50 Inc VAT CA$76.50 Exc VAT1-5 days handlingPart No.2073 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidFuel Thread OD: 13.7mmCA$42.50 Inc VAT CA$42.50 Exc VATOut of stockPart No.2074 -
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
CA$40.51 Inc VAT CA$40.51 Exc VAT1-5 days handlingPart No.50443 -
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male ThreadCA$24.50 Inc VAT CA$24.50 Exc VAT1-5 days handlingPart No.50442
Exhaust Pipe
-
Flexible Exhaust Coupler suitable for John Deere - AL114384 I.D: 61mm.
Approx. Length: 255mm.
CA$164.92 Inc VAT CA$164.92 Exc VAT1-5 days handlingPart No.80128 -
Exhaust Pipe suitable for John Deere - L112233 L115854 Exhaust PipeFitting Size: 77mmOverall Length: 1010mmCA$185.00 Inc VAT CA$185.00 Exc VAT1-5 days handlingPart No.80223 -
Exhaust Pipe Heat Shield suitable for John Deere - L113658 Length 1340mm X 125mm.
CA$260.40 Inc VAT CA$260.40 Exc VAT1-5 days handlingPart No.80227
Silencer Pipe
-
Silencer Pipe suitable for John Deere - AL116287 Deluxe Exhaust. Length: 1770mm Diameter: 66mm.CA$165.76 Inc VAT CA$165.76 Exc VAT1-5 days handlingPart No.1652 -
Silencer Pipe suitable for John Deere - L113259 Lower Pipe. Length: 735mm. Diameter: 63mm.CA$132.59 Inc VAT CA$132.59 Exc VAT1-5 days handlingPart No.1653
Valves Engine
-
Exhaust Valve suitable for John Deere - R90692 Exhaust ValveCA$21.88 Inc VAT CA$21.88 Exc VAT1-5 days handlingPart No.1617 -
Inlet Valve suitable for John Deere - R98062 Inlet ValveCA$21.88 Inc VAT CA$21.88 Exc VAT1-5 days handlingPart No.1618
-

