John Deere 6010 Series 6010 Engine PARTS
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere - RE526670 RE66082 Head Gasket SetCA$128.50 Inc VAT CA$128.50 Exc VATOut of stockPart No.50370
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R123542 Rocker Cover GasketCA$27.85 Inc VAT CA$27.85 Exc VAT1-5 days handlingPart No.1605
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mmCA$11.54 Inc VAT CA$11.54 Exc VAT1-5 days handlingPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - R91889 Valve Collet (Pair)CA$7.72 Inc VAT CA$7.72 Exc VAT1-5 days handlingPart No.1614 -
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)CA$3.25 Inc VAT CA$3.25 Exc VAT1-5 days handlingPart No.7407
Valve Ancillaries
-
Exhaust Valve Seat - R85687 suitable for John Deere - R85687 Exhaust Valve Seat suitable for John DeereProduct Info- Inner Diameter: 34mm- Outer Diameter: 43mmCA$13.02 Inc VAT CA$13.02 Exc VATOut of stockPart No.1619 -
Valve Retainer suitable for John Deere - RE31323 RE60005 Valve RetainerCA$32.55 Inc VAT CA$32.55 Exc VAT1-5 days handlingPart No.1615 -
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mmCA$6.51 Inc VAT CA$6.51 Exc VAT1-5 days handlingPart No.1496 -
Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve CapID: 7.75mmOD: 18mmHeight: 12mmCA$6.51 Inc VAT CA$6.51 Exc VAT1-5 days handlingPart No.1616
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 DegreesCA$45.00 Inc VAT CA$45.00 Exc VAT1-5 days handlingPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 DegreesCA$30.99 Inc VAT CA$30.99 Exc VAT1-5 days handlingPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere - RE501455 RE527042 RE66086 Complete Gasket SetCA$144.24 Inc VAT CA$144.24 Exc VAT1-5 days handlingPart No.50371
Oil Pumps
-
Oil Pump RE504914 suitable for John Deere - RE502269 RE504914 RE59582 Oil Pump.Show MoreCA$275.00 Inc VAT CA$275.00 Exc VAT1-5 days handlingPart No.75570
Piston Engine
-
Piston, Pin & Clips suitable for John Deere - AR79868 AR87738 RE19282 Crown diameter: 105.870mm.Skirt diameter: 106.390mm.Compression height: 66.306mm.Overall height: 112.020mm.Chamber diameter: 58.360mm.Chamber depth: 18.800mm.Pi... Show MoreCA$113.93 Inc VAT CA$113.93 Exc VAT1-5 days handlingPart No.1442
Piston, Pin & Clips RE505101 suitable for John Deere - RE505101 RE520589 RE59279 Piston has a 2.5mm radius groove for the top piston ring.Piston Diameter: 106.39mm.Compression Height: 71.65mm.Piston Length: 100.6mm.Pin Diameter: 34.925mm.To suit Bore: 106... Show MoreCA$108.20 Inc VAT CA$108.20 Exc VAT1-5 days handlingPart No.1600Piston Rings Engine
-
Piston Ring Set - RE66271 suitable for John Deere - RE66271 For use with Piston 1600.Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1601FM.CA$33.35 Inc VAT CA$33.35 Exc VAT1-5 days handlingPart No.1601 -
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.CA$38.50 Inc VAT CA$38.50 Exc VAT1-5 days handlingPart No.1443
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere - R116397 R115336 R116383 Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show MoreCA$64.47 Inc VAT CA$64.47 Exc VAT1-5 days handlingPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604CA$7.08 Inc VAT CA$7.08 Exc VAT1-5 days handlingPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)CA$15.91 Inc VAT CA$15.91 Exc VAT1-5 days handlingPart No.1483
Crankshafts
-
Crankshaft - RE50618 suitable for John Deere - R113596 RE504638 RE50618 Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsMain journal: 80mmConrod journal: 78mmNose length... Show MoreCA$1,801.10 Inc VAT CA$1,801.10 Exc VATOut of stockPart No.1621Conrods
-
Conrod suitable for John Deere - RE500002 RE60272 John Deere. 6515 - Upto serial Number 799999. 6520 - Upto serial Number 799999. 6520SE - Upto serial Number 799999.Small End/Pin size ID: 34.7mm.Big End ID: 82.6mm.Total Le... Show MoreCA$195.30 Inc VAT CA$195.30 Exc VAT1-5 days handlingPart No.1620Conrod Bushes
-
Small End Bush suitable for John Deere - R123960 John Deere. 6515 - Upto serial Number 799999. 6520 - Upto serial Number 799999. 6520SE - Upto serial Number 799999.Dimensions- Overall Length: 31.70mm- ID: 34.60mmShow MoreCA$17.36 Inc VAT CA$17.36 Exc VAT1-5 days handlingPart No.1603
Conrod Bolts & Nuts
-
Conrod Bolt R114083 suitable for John Deere - R114083 R500500 Length: 64mm.John Deere 4045D, 6068D, 4045T, 6068T.CA$11.38 Inc VAT CA$11.38 Exc VAT1-5 days handlingPart No.75569
Crankshaft Seals
-
Rear Crankshaft Seal suitable for John Deere - AR22965 AR92893 AT22965 Rear Crankshaft Seal.External Diameter:- 146.01MMInternal Diameter:- 117.38MMWidth / Thickness:- 14.35MMCA$54.50 Inc VAT CA$54.50 Exc VAT1-5 days handlingPart No.1461 -
Front Crank Seal suitable for John Deere - RE505515 RE516340 RE52346 Front Crank SealCA$41.27 Inc VAT CA$41.27 Exc VAT1-5 days handlingPart No.1606
Camshaft
-
Camshaft suitable for John Deere - RE56375 CamshaftDimensions- Overall Length: 585mm- Journal Diameter: 55.80mmCA$445.30 Inc VAT CA$445.30 Exc VAT1-5 days handlingPart No.1622
Oil Filters
-
Oil Filter Spin On suitable for John Deere - RE59754 Oil Filter Spin OnCA$50.68 Inc VAT CA$50.68 Exc VAT1-5 days handlingPart No.10209
Fuel Filters
-
Primary Fuel Filter suitable for John Deere - RE509031 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
CA$64.32 Inc VAT CA$64.32 Exc VATOut of stockPart No.10215 -
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,CA$59.47 Inc VAT CA$59.47 Exc VATOut of stockPart No.FS19861 -
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.CA$50.36 Inc VAT CA$50.36 Exc VATOut of stockPart No.10206 -
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.CA$67.63 Inc VAT CA$67.63 Exc VAT1-5 days handlingPart No.FS19831 -
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show MoreCA$84.25 Inc VAT CA$84.25 Exc VAT1-5 days handlingPart No.FS19840
Fleetguard FS19830 Fuel Filter suitable for John Deere - RE509208 RE517181 Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.CA$75.22 Inc VAT CA$75.22 Exc VAT1-5 days handlingPart No.FS19830
Filter Kits
-
Filter Service Kit suitable for John Deere - Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)CA$493.75 Inc VAT CA$493.75 Exc VATOut of stockPart No.FSK804
Fuel Lift Pumps
-
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filterCA$96.50 Inc VAT CA$96.50 Exc VAT1-5 days handlingPart No.1613
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.CA$300.54 Inc VAT CA$300.54 Exc VAT1-5 days handlingPart No.9477
Fuel Injectors
-
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mmCA$0.50 Inc VAT CA$0.50 Exc VAT1-5 days handlingPart No.1512 -
Fuel Injector RE60062 suitable for John Deere - RE60062 RE57469 SE500828 Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262CA$99.45 Inc VAT CA$99.45 Exc VAT1-5 days handlingPart No.1612
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidCA$76.50 Inc VAT CA$76.50 Exc VAT1-5 days handlingPart No.2073 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidFuel Thread OD: 13.7mmCA$42.50 Inc VAT CA$42.50 Exc VATOut of stockPart No.2074
Filler Caps Oil
Exhaust Pipe
-
Exhaust Pipe suitable for John Deere - AL116902 Exhaust PipeCA$180.85 Inc VAT CA$180.85 Exc VATOut of stockPart No.80220 -
Exhaust Lower Pipe suitable for John Deere - L102641 Suitable for corner post exhaust systems only.Product Info:- Wide End Inner Diameter: 65mm- Narrow End Outer Diameter: 60.7mmCA$129.33 Inc VAT CA$129.33 Exc VATOut of stockPart No.74659 -
Exhaust Pipe Heat Shield suitable for John Deere - L158903 Length 1480mm X 100mm.
CA$260.40 Inc VAT CA$260.40 Exc VATOut of stockPart No.80226
Silencer Pipe
-
Silencer AL78007 suitable for John Deere - AL78007 Silencer Exits From Left Hand Side Of Bonnet.CA$364.66 Inc VAT CA$364.66 Exc VAT1-5 days handlingPart No.1599 -
Silencer Pipe - L102236 suitable for John Deere - L102236Silencer Pipe suitable for John Deere. 6100 - From Serial Number 143102. 6200 - From Serial Number 143102. 6300 - From Serial Number 143102. 6400 - From Serial Number 143102.Product Info- Mou... Show MoreCA$99.45 Inc VAT CA$99.45 Exc VAT1-5 days handlingPart No.1633
Valves Engine
-
Exhaust Valve suitable for John Deere - R90692 Exhaust ValveCA$21.88 Inc VAT CA$21.88 Exc VAT1-5 days handlingPart No.1617 -
Inlet Valve suitable for John Deere - R98062 Inlet ValveCA$21.88 Inc VAT CA$21.88 Exc VAT1-5 days handlingPart No.1618
-
-
