John Deere 6000 Series 6800 Engine PARTS
Cylinder Head Gasket
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R68228 R75728 Rocker Cover GasketCA$18.06 Inc VAT CA$18.06 Exc VATOut of stockPart No.1479
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mmCA$11.54 Inc VAT CA$11.54 Exc VAT1-5 days handlingPart No.1495
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)CA$3.25 Inc VAT CA$3.25 Exc VAT1-5 days handlingPart No.7407
Valve Ancillaries
-
Exhaust Valve Seat - R85687 suitable for John Deere - R85687 Exhaust Valve Seat suitable for John DeereProduct Info- Inner Diameter: 34mm- Outer Diameter: 43mmCA$13.02 Inc VAT CA$13.02 Exc VATOut of stockPart No.1619 -
Valve Retainer suitable for John Deere - RE31323 RE60005 Valve RetainerCA$32.55 Inc VAT CA$32.55 Exc VAT1-5 days handlingPart No.1615 -
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mmCA$6.51 Inc VAT CA$6.51 Exc VAT1-5 days handlingPart No.1496 -
Valve Tappet suitable for John Deere - T20073 Valve TappetCA$19.53 Inc VAT CA$19.53 Exc VAT1-5 days handlingPart No.1502 -
Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve CapID: 7.75mmOD: 18mmHeight: 12mmCA$6.51 Inc VAT CA$6.51 Exc VAT1-5 days handlingPart No.1616
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 DegreesCA$45.00 Inc VAT CA$45.00 Exc VAT1-5 days handlingPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 DegreesCA$30.99 Inc VAT CA$30.99 Exc VAT1-5 days handlingPart No.1464A
Cylinder Block
-
John Deere Engine Mount Rubber suitable for John Deere - RE60720 John Deere Engine Mount Rubber
For 6600, 6800, 6900 Series Tractors before Serial Number 130915CA$37.79 Inc VAT CA$37.79 Exc VAT1-5 days handlingPart No.74489
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere - RE38555 RE38556 RE501569 Complete Gasket SetCA$249.55 Inc VAT CA$249.55 Exc VAT1-5 days handlingPart No.1638
Piston Engine
-
Piston, Pin & Clips- RE48469 suitable for John Deere - RE48469 RE28920 Piston Length: 120mm
Chamber Depth: 22.02mm.CA$119.02 Inc VAT CA$119.02 Exc VAT1-5 days handlingPart No.1636
Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.CA$38.50 Inc VAT CA$38.50 Exc VAT1-5 days handlingPart No.1443
Liners Engine Cyl
-
Liner C/W Seals - R116397 suitable for John Deere - R116397 R115336 R116383 Liner which comes with sealing rings.Dimensions as follows -Bore diameter - 106.27mmFlange diameter - 125.80mmOverall height - 218.86mmFlange width - 9.75mmO... Show MoreCA$64.47 Inc VAT CA$64.47 Exc VAT1-5 days handlingPart No.1604
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604CA$7.08 Inc VAT CA$7.08 Exc VAT1-5 days handlingPart No.1450
Crankshafts
-
Crankshaft suitable for John Deere - RE33687 RE45517 RE502191 *Must order 1 x Main Bearings (Part No. 1486) with this Crankshaft*
RE502191 replaces: R104523, R121027, R126921, R501271
Single Bolt Hole Pulley.
Straight Nose.
*NOTE - Crankshaft will require cleaning to remove any rust preventative p... Show MoreCA$2,518.07 Inc VAT CA$2,518.07 Exc VAT1-5 days handlingPart No.2013
Conrod Bearings
-
Conrod Bearings Pair STD AR97517 suitable for John Deere - AR69098 AR97517 R54801 Standard Size.Width: 26.6mm.John Deere 4045T, 6068T.CA$24.75 Inc VAT CA$24.75 Exc VAT1-5 days handlingPart No.75572
Main Bearings
-
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.CA$59.43 Inc VAT CA$59.43 Exc VAT1-5 days handlingPart No.1486
Conrod Bolts & Nuts
-
Conrod Bolt - R74195 suitable for John Deere - R56445 R74195 Conrod BoltDimensions- Thread: 1/2UNF x 35- Overall Length: 74.80mmCA$13.48 Inc VAT CA$13.48 Exc VAT1-5 days handlingPart No.75568
Ancillaries Crank
Crankshaft Seals
-
Rear Crankshaft Seal suitable for John Deere - AR22965 AR92893 AT22965 Rear Crankshaft Seal.External Diameter:- 146.01MMInternal Diameter:- 117.38MMWidth / Thickness:- 14.35MMCA$54.50 Inc VAT CA$54.50 Exc VAT1-5 days handlingPart No.1461 -
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank SealCA$22.57 Inc VAT CA$22.57 Exc VAT1-5 days handlingPart No.1460
Pulleys
-
Fan Belt Tensioner Pulley suitable for John Deere - AL116368 AL112293 AL113385 ID: 17mmOD: 70mmWidth: 35mmM10 ThreadCA$31.12 Inc VAT CA$31.12 Exc VAT1-5 days handlingPart No.75125
Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.Diameter: 94.1mm.CA$14.50 Inc VAT CA$14.50 Exc VAT1-5 days handlingPart No.8493
Fuel Filters
-
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,CA$59.47 Inc VAT CA$59.47 Exc VATOut of stockPart No.FS19861 -
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.CA$50.36 Inc VAT CA$50.36 Exc VATOut of stockPart No.10206 -
Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.CA$67.63 Inc VAT CA$67.63 Exc VAT1-5 days handlingPart No.FS19831 -
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show MoreCA$84.25 Inc VAT CA$84.25 Exc VAT1-5 days handlingPart No.FS19840
Filter Kits
-
Filter Service Kit suitable for John Deere - Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)CA$538.86 Inc VAT CA$538.86 Exc VATOut of stockPart No.FSK803
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket IncludedCA$43.40 Inc VAT CA$43.40 Exc VAT1-5 days handlingPart No.55008 -
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filterCA$96.50 Inc VAT CA$96.50 Exc VAT1-5 days handlingPart No.1613 -
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket IncludedCA$58.50 Inc VAT CA$58.50 Exc VAT1-5 days handlingPart No.55016
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.CA$300.54 Inc VAT CA$300.54 Exc VAT1-5 days handlingPart No.9477
Fuel Injectors
-
Fuel Injector suitable for John Deere - RE36939 RE38087 SE501097 Fuel InjectorInjector Nozzle marked with - 28485CA$98.50 Inc VAT CA$98.50 Exc VAT1-5 days handlingPart No.9487A -
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mmCA$0.50 Inc VAT CA$0.50 Exc VAT1-5 days handlingPart No.1512
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidCA$76.50 Inc VAT CA$76.50 Exc VAT1-5 days handlingPart No.2073 -
Fuel Shut Off Solenoid - RE22744 suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidFuel Thread OD: 13.7mmCA$42.50 Inc VAT CA$42.50 Exc VATOut of stockPart No.2074 -
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
CA$40.51 Inc VAT CA$40.51 Exc VAT1-5 days handlingPart No.50443 -
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male ThreadCA$24.50 Inc VAT CA$24.50 Exc VAT1-5 days handlingPart No.50442
Filler Caps Oil
Exhaust Pipe
-
Exhaust Pipe suitable for John Deere - L112233 L115854 Exhaust PipeFitting Size: 77mmOverall Length: 1010mmCA$185.00 Inc VAT CA$185.00 Exc VAT1-5 days handlingPart No.80223
Silencer Pipe
-
Silencer Box suitable for John Deere - AL117925 Silencer Exits From Right Hand Side Of Bonnet. Corner Post Type. Suits 6059T & 6068T Engines.CA$368.90 Inc VAT CA$368.90 Exc VAT1-5 days handlingPart No.1650 -
Silencer Pipe suitable for John Deere - AL80501 Silencer PipeCA$384.55 Inc VAT CA$384.55 Exc VATOut of stockPart No.72229 -
Silencer Box suitable for John Deere - AL117923 Silencer Exits From Left Hand Side Of The Bonnet.CA$268.98 Inc VAT CA$268.98 Exc VAT1-5 days handlingPart No.1651
