John Deere 6000 Series 6505 Engine PARTS
Cylinder Head Gasket
-
Head Gasket Set suitable for John Deere - RE526670 RE66082 Head Gasket SetCA$128.50 Inc VAT CA$128.50 Exc VATOut of stockPart No.50370 -
Head Gasket Set suitable for John Deere - RE526672 Head Gasket SetCA$182.50 Inc VAT CA$182.50 Exc VAT1-5 days handlingPart No.50372
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - R123542 Rocker Cover GasketCA$27.85 Inc VAT CA$27.85 Exc VAT1-5 days handlingPart No.1605
Valve Collets
-
Valve Collet (Pair) suitable for John Deere - R91889 Valve Collet (Pair)CA$7.72 Inc VAT CA$7.72 Exc VAT1-5 days handlingPart No.1614
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 DegreesCA$45.00 Inc VAT CA$45.00 Exc VAT1-5 days handlingPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 DegreesCA$30.99 Inc VAT CA$30.99 Exc VAT1-5 days handlingPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set - RE66087 suitable for John Deere - R501456 RE501456 RE526965 Complete Gasket SetCA$200.07 Inc VAT CA$200.07 Exc VAT1-5 days handlingPart No.53219
Oil Pumps
-
Oil Pump RE504914 suitable for John Deere - RE502269 RE504914 RE59582 Oil Pump.Show MoreCA$275.00 Inc VAT CA$275.00 Exc VAT1-5 days handlingPart No.75570
Piston Engine
-
Piston, Pin & Clips RE505101 suitable for John Deere - RE505101 RE520589 RE59279 Piston has a 2.5mm radius groove for the top piston ring.Piston Diameter: 106.39mm.Compression Height: 71.65mm.Piston Length: 100.6mm.Pin Diameter: 34.925mm.To suit Bore: 106... Show MoreCA$108.20 Inc VAT CA$108.20 Exc VAT1-5 days handlingPart No.1600Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604CA$7.08 Inc VAT CA$7.08 Exc VAT1-5 days handlingPart No.1450
Sump Gaskets
-
Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)CA$15.91 Inc VAT CA$15.91 Exc VAT1-5 days handlingPart No.1483
Crankshafts
-
Crankshaft - RE50618 suitable for John Deere - R113596 RE504638 RE50618 Genmot Crank Shaft suitable for John Deere *NOTE - Crankshaft will require cleaning to remove any rust preventative prior to fitting*DimensionsMain journal: 80mmConrod journal: 78mmNose length... Show MoreCA$1,801.10 Inc VAT CA$1,801.10 Exc VATOut of stockPart No.1621
Crankshaft RE505921 suitable for John Deere - RE505921 Crankshaft6 Bolt Hole Flywheel FixingMains: 3.1235"/3.064"Conrods: 3.0635"/3.064"Stroke: 5.000"Lip SealHol... Show MoreCA$2,754.01 Inc VAT CA$2,754.01 Exc VAT1-5 days handlingPart No.74254
Crankshaft RE505921 suitable for John Deere - RE505921 Tappered Nose
6 Bolt Hole Flywheel Fixing
CA$3,054.49 Inc VAT CA$3,054.49 Exc VATOut of stockPart No.74246
Crankshaft (Genmot) suitable for John Deere - RE504639 RE515785 RE52850Straight Nose7 Holes flywheel end4 Bolt Holes crank pulley endCA$3,580.20 Inc VAT CA$3,580.20 Exc VAT1-5 days handlingPart No.75501Conrods
-
Conrod suitable for John Deere - RE500002 RE60272 John Deere. 6515 - Upto serial Number 799999. 6520 - Upto serial Number 799999. 6520SE - Upto serial Number 799999.Small End/Pin size ID: 34.7mm.Big End ID: 82.6mm.Total Le... Show MoreCA$195.30 Inc VAT CA$195.30 Exc VAT1-5 days handlingPart No.1620Conrod Bushes
-
Small End Bush suitable for John Deere - R123960 John Deere. 6515 - Upto serial Number 799999. 6520 - Upto serial Number 799999. 6520SE - Upto serial Number 799999.Dimensions- Overall Length: 31.70mm- ID: 34.60mmShow MoreCA$17.36 Inc VAT CA$17.36 Exc VAT1-5 days handlingPart No.1603
Gears Crank
Crankshaft Seals
-
Front Crank Seal suitable for John Deere - RE505515 RE516340 RE52346 Front Crank SealCA$41.27 Inc VAT CA$41.27 Exc VAT1-5 days handlingPart No.1606
Oil Filters
-
Oil Filter Spin On suitable for John Deere - RE59754 Oil Filter Spin OnCA$50.68 Inc VAT CA$50.68 Exc VAT1-5 days handlingPart No.10209
Fuel Filters
-
Primary Fuel Filter suitable for John Deere - RE509031 30 Microns.
O.D: 83.3mm.
I.D: 16.7mm One End.
Length: 151.6mm.
CA$64.32 Inc VAT CA$64.32 Exc VATOut of stockPart No.10215 -
Fleetguard FS19861 Fuel Filter suitable for John Deere - RE534 RE53400 RE6445 Overall height: 155mm, OD: 84mm, Thread size: -,CA$59.47 Inc VAT CA$59.47 Exc VATOut of stockPart No.FS19861 -
Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450 Water Separator Element with Drain. Used On Models With Single Fuel Filter.CA$50.36 Inc VAT CA$50.36 Exc VATOut of stockPart No.10206 -
Fleetguard FS19840 Secondary Fuel Filter suitable for John Deere - RE52987 RE62419 RE64450Fleetguard FS19840 fuel water separator cartridge filter works to remove water and other particulates and ensures clean fuel is delivered to your engine.Length: 173.00 mmLargest OD: 84.00 mmL... Show MoreCA$84.25 Inc VAT CA$84.25 Exc VAT1-5 days handlingPart No.FS19840
Fleetguard FS19830 Fuel Filter suitable for John Deere - RE509208 RE517181 Overall height: 155mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.CA$75.22 Inc VAT CA$75.22 Exc VAT1-5 days handlingPart No.FS19830
Filter Kits
-
Filter Service Kit suitable for John Deere - Contains; Oil Filter Fuel Filter Air Filter (Outer) Air Filter (Inner)CA$493.75 Inc VAT CA$493.75 Exc VATOut of stockPart No.FSK804
Fuel Lift Pumps
-
Fuel Pump suitable for John Deere - AL78405 Tank Mounted Fuel Pump- 2 Spade Socket- Pipe Diameter: 10mm- Includes mounting plate and filterCA$96.50 Inc VAT CA$96.50 Exc VAT1-5 days handlingPart No.1613
Fuel Pumps Electric
-
Fuel Pump suitable for John Deere - AL78405 Mounted In Tank. Stanadyne.CA$300.54 Inc VAT CA$300.54 Exc VAT1-5 days handlingPart No.9477
Fuel Injectors
-
Fuel Injector RE60062 suitable for John Deere - RE60062 RE57469 SE500828 Fuel Injector.Tee Connector Not Included.Suitable For Replacing Injectors With Injector Nozzle Number:- 28478 / 32262CA$99.45 Inc VAT CA$99.45 Exc VAT1-5 days handlingPart No.1612
Fuel Injector Nozzle
-
Injector Seal Kit - RE64292 suitable for John Deere - RE64292 Injector Seal Kit.Suitable for a wide range of John Deere machines fitted with 'Pencil Style' injectors.One kit required per Injector.CA$8.55 Inc VAT CA$8.55 Exc VAT1-5 days handlingPart No.75961
Fuel Ancillaries
-
Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off SolenoidCA$76.50 Inc VAT CA$76.50 Exc VAT1-5 days handlingPart No.2073 -
Lockable Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Case/IH. 3200 Series - From Serial Number JJE0925810.
CA$40.51 Inc VAT CA$40.51 Exc VAT1-5 days handlingPart No.50443 -
Fuel Cap suitable for John Deere - AL113086 AL113087 UK Made. Male ThreadCA$24.50 Inc VAT CA$24.50 Exc VAT1-5 days handlingPart No.50442
Valves Engine
-
Exhaust Valve suitable for John Deere - R90692 Exhaust ValveCA$21.88 Inc VAT CA$21.88 Exc VAT1-5 days handlingPart No.1617 -
Inlet Valve suitable for John Deere - R98062 Inlet ValveCA$21.88 Inc VAT CA$21.88 Exc VAT1-5 days handlingPart No.1618
-
-
