John Deere 55 Series, Classic 2755 Electrical PARTS
Starter Motors
-
Starter Motor - 12V, 3Kw (Mahle) suitable for John Deere - AL67897 AL62690 AR70436 Teeth: 10
Tooth Pitch:12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
CA$905.23 Inc VAT CA$905.23 Exc VATOut of stockPart No.93044 -
Starter Motor 12V, 3.1Kw (Mahle) suitable for John Deere - AL110597 AL62690 AL62772 Teeth: 10
Tooth Pitch: 12.29mm
Flange Ø: 82.5mm
Mounting Angle: -45°
Number Of Mounting Bores: 2
Mounting Points Diameter: 105mm
Bore Ø 1: 13.5mm
Rotation Direction: Clockwise
For Flywheel Depth: 38mm
CA$845.96 Inc VAT CA$845.96 Exc VAT1-5 days handlingPart No.81130 -
Starter Motor suitable for John Deere - AL110597 AL62690 AL62772 Bosch 369 Type.
Power: 3.1kw.
Volts: 12.
Number of Teeth: 10.
Number of Flange Holes: 2.
Bell Opening: Left.CA$456.79 Inc VAT CA$456.79 Exc VATOut of stockPart No.5268 -
Gear Reduction Starter Motor - 12V, 3.2Kw (Mahle) suitable for John Deere - RE519568 RE501680 RE63010 Teeth: 10.
Tooth Pitch: 12.29mm.
Flange Ø: 82.5mm.
Mounting Angle: -45°.
Number Of Mounting Bores: 2.
Mounting Points Diameter: 105mm.
Bore Ø 1: 10.5mm.
Rotation Direction: Clockwise.
For Flywheel Depth: 38mm.
CA$849.14 Inc VAT CA$849.14 Exc VAT1-5 days handlingPart No.93025
Alternator
-
Alternator (Less Pulley) 14V, 70 Amps suitable for John Deere - For pulley use Agriline Ref. 81281.
These alternators have a built in regulator, if your old alternator has a external regulator with plug then this will need cutting off and loop crimp ends fitted; Alternator terminals are lettered to match old A... Show MoreCA$355.16 Inc VAT CA$355.16 Exc VAT1-5 days handlingPart No.50452 -
Alternator 14V, 55 Amps (Mahle) suitable for John Deere - Belt Pulley Ø: 68mm
Number Of Belts: 1
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance:56 mm
Mounting Points Diameter: 86mm
Distance From Pulley To Alternator: 20.7 mm
CA$353.01 Inc VAT CA$353.01 Exc VAT1-5 days handlingPart No.97013 -
Alternator 14V, 55 Amps (Mahle) suitable for John Deere - AL35998 AL28516 AL81436 Belt Pulley Ø: 87 mm
Number Of Belts:1
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance:56 mm
Mounting Points Diameter: 86mm
Distance From Pulley To Alternator: 27mm
CA$462.70 Inc VAT CA$462.70 Exc VATOut of stockPart No.97014 -
Alternator 14V, 70 Amps (Mahle) suitable for John Deere - Belt Pulley Ø: 87mm
Number Of Belts: 1
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance: 56mm
Mounting Points Diameter: 86mm
Distance From Pulley To Alternator: 27mm
CA$514.67 Inc VAT CA$514.67 Exc VATOut of stockPart No.81276
Alternator Pulley
-
Alternator Pulley suitable for John Deere - For use with Alternator Agriline Ref. 50452.
Bore: 176mm.
Outer Diameter: 92mm.
To Fit Belt (Top Edge) Width: 17mm.CA$70.21 Inc VAT CA$70.21 Exc VAT1-5 days handlingPart No.81281
Heater Plug
-
Heater Plug suitable for John Deere - RE502079 Heater PlugCA$38.90 Inc VAT CA$38.90 Exc VAT1-5 days handlingPart No.1553
Horn Button
-
Horn Button suitable for John Deere - AL17684 Switch is only on when the button is held down. Screw terminals. Fits 22mm hole.CA$9.77 Inc VAT CA$9.77 Exc VATOut of stockPart No.5107
Oil Pressure Switch
-
Oil Pressure Switch suitable for John Deere - AR27977 AT85174 Oil Pressure SwitchCA$17.90 Inc VAT CA$17.90 Exc VAT1-5 days handlingPart No.1568
Beacons
-
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.CA$19.92 Inc VAT CA$19.92 Exc VAT1-5 days handlingPart No.8450 -
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
CA$17.09 Inc VAT CA$17.09 Exc VAT1-5 days handlingPart No.8451 -
Rotating Warning Beacon suitable for John Deere - For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 60mm.
Diameter: 125mm.
12V H1 Halogen Bulb.12V / 55W , 24V / 70W.
Impact Resistant Lens.
CE Approved.
Replacement Bulb - Agriline Ref: 9368<... Show MoreCA$72.50 Inc VAT CA$72.50 Exc VAT1-5 days handlingPart No.54028
Beacon Bracket suitable for John Deere - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
CA$24.07 Inc VAT CA$24.07 Exc VAT1-5 days handlingPart No.8452
Relays
-
Relay 4 Pin suitable for John Deere - AL69699 AL69709 Main Current.
Terminals: 5.
Volts: 12.
CA$14.56 Inc VAT CA$14.56 Exc VAT1-5 days handlingPart No.60037