John Deere 50 Series, Classic 1950 Engine PARTS
Cylinder Head Gasket
-
Head Gasket suitable for John Deere - R125865 R515090 R515273 John Deere. 1020 - From Serial Number 085100.CA$28.21 Inc VAT CA$28.21 Exc VAT1-5 days handlingPart No.1474 -
Head Gasket Set suitable for John Deere - AR102293 AR102297 AR71990 John Deere. 1020 - From Serial Number 085100.CA$47.74 Inc VAT CA$47.74 Exc VATOut of stockPart No.1451
Rocker Cover Gaskets
-
Rocker Cover Gasket suitable for John Deere - AR102261 R68226 R75729 Use With Metal Rocker Cover.CA$12.35 Inc VAT CA$12.35 Exc VAT1-5 days handlingPart No.1477
Cyl Head Ancillaries
-
Rocker Shaft suitable for John Deere - R54985 RE519735 RE502875 Rocker Shaft, suitable for 3 Cyl TractorsDimensions- Overall Length: 337mm- OD: 20mmCA$39.38 Inc VAT CA$39.38 Exc VAT1-5 days handlingPart No.74302
Valve Springs
-
Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.Product Info- Overall length: 55cm- Overall diameter: 35mmCA$11.54 Inc VAT CA$11.54 Exc VAT1-5 days handlingPart No.1495
Valve Collets
-
Valve Collet suitable for John Deere - T20070 T20077 Valve Collet, Supplied Singularly, Not a Pair. Customers Should Order Two Collets If They Require A Pair.CA$1.87 Inc VAT CA$1.87 Exc VATOut of stockPart No.81254 -
Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)CA$3.25 Inc VAT CA$3.25 Exc VAT1-5 days handlingPart No.7407
Valve Ancillaries
-
Valve Stem Cap suitable for John Deere - T20129 Valve Stem CapOD: 13mmID: 9.4mmThickness: 6mmCA$6.51 Inc VAT CA$6.51 Exc VAT1-5 days handlingPart No.1496 -
Valve Tappet suitable for John Deere - T20073 Valve TappetCA$19.53 Inc VAT CA$19.53 Exc VAT1-5 days handlingPart No.1502
Rocker Components
Studs Cylinder Head
-
Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 DegreesCA$45.00 Inc VAT CA$45.00 Exc VAT1-5 days handlingPart No.1464 -
Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 DegreesCA$30.99 Inc VAT CA$30.99 Exc VAT1-5 days handlingPart No.1464A
Cyl Block Gaskets
-
Complete Gasket Set suitable for John Deere - AR102290 AR102298 AR53369 Must be supplied with 1464, Stretch BoltsCA$114.04 Inc VAT CA$114.04 Exc VAT1-5 days handlingPart No.1457
Engine Kits
-
Engine Overhaul Kit suitable for John Deere - Consists of; 3 x Cylinder Kit, 1 x Complete Gasket Kit, 1 x Front Crank Seal, 1 x Rear Crank Seal, 3 x Small End Bush, 1 x Cylinder Head Stud (Pack Of 9)CA$1,002.54 Inc VAT CA$1,002.54 Exc VAT1-5 days handlingPart No.1467
Oil Pumps
-
Engine Oil Pump Pipe suitable for John Deere - R113752 Engine Oil Pump PipeOD: 15.60mmCA$27.17 Inc VAT CA$27.17 Exc VATOut of stockPart No.81246 -
Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 BoltCA$354.04 Inc VAT CA$354.04 Exc VAT1-5 days handlingPart No.1505 -
Oil Pump Assembly - RE35685 suitable for John Deere - AR67074 AR67077 AT18021 Later version Oil Pump with 4 Bolt HolesFor pump with 3 holes, Order Agriline Nr: 1504CA$155.00 Inc VAT CA$155.00 Exc VATOut of stockPart No.1504
Piston Engine
-
John Deere Piston, Ring & Liner Kit suitable for John Deere - DD11831 RE15674 RE48818 John Deere Piston, Ring & Liner Kit.Liner Bore / Internal Diameter: 106.58mm.Liner Flange Diameter: 125.92mm.Liner Flange Width: 9.79mm.Liner Overall Height: 196.93mm.Show More CA$225.00 Inc VAT CA$225.00 Exc VAT1-5 days handlingPart No.1446
Piston, Pin & Clips suitable for John Deere - AR71067 AR87748 RE19278 Crown diameter; 104.750mm.Skirt diameter: 106.390mm.Compression height: 66.300mm.Overall height: 111.970mm.Chamber diameter: 58.420mm.Chamber depth: 18.620mm.Pi... Show MoreCA$105.02 Inc VAT CA$105.02 Exc VAT1-5 days handlingPart No.1445Piston Rings Engine
-
Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.CA$38.50 Inc VAT CA$38.50 Exc VAT1-5 days handlingPart No.1443
Liners Engine Cyl
-
Liner C/W Seals suitable for John Deere - R131575 Finished Liner. Basic Specifications: Bore Dia 106.508 mm Height 196.930 mm. Comes with Sealing Rings. Wet LinerCA$46.46 Inc VAT CA$46.46 Exc VAT1-5 days handlingPart No.1444
Liner Shims & ORings
-
Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604CA$7.08 Inc VAT CA$7.08 Exc VAT1-5 days handlingPart No.1450
Sump Gaskets
Crankshafts
-
Crankshaft (Genmot) RE50979 suitable for John Deere - RE50979 RE31257 RE101223 Crankshaft (Genmot)CA$2,503.24 Inc VAT CA$2,503.24 Exc VAT1-5 days handlingPart No.72276
Conrod Bearings
-
Conrod Bearing Pair suitable for John Deere - AR71080 AT21138 RE27348 Product is 1 Pair of Shells, STANDARD For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 PairsCA$15.00 Inc VAT CA$15.00 Exc VAT1-5 days handlingPart No.1488 -
Conrod Bearing Pair suitable for John Deere - AR76131 AT21128 RE27364 Product is 1 Pair of Shells, + 0.030" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 PairsCA$15.00 Inc VAT CA$15.00 Exc VAT1-5 days handlingPart No.1488C -
Conrod Bearing Pair suitable for John Deere - AR76130 AT21126 RE27358 Product is 1 Pair of Shells, + 0.020" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 PairsCA$15.00 Inc VAT CA$15.00 Exc VAT1-5 days handlingPart No.1488B -
Conrod Bearing Pair suitable for John Deere - RE27349 Product is 1 Pair of Shells, + 0.010" For 3 Cylinder Order 3 Pairs For 4 Cylinder Order 4 Pairs For 6 Cylinder Order 6 PairsCA$15.00 Inc VAT CA$15.00 Exc VAT1-5 days handlingPart No.1488A
Main Bearings
-
Main Bearing Set +0.020" - John Deere AT21134 suitable for John Deere - AT21134 RE27360 Main Bearing Set +0.020" - John Deere AT21134, RE27360CA$115.36 Inc VAT CA$115.36 Exc VAT1-5 days handlingPart No.1484B -
Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.CA$59.43 Inc VAT CA$59.43 Exc VAT1-5 days handlingPart No.1486 -
Main Bearing Set +0.030" - John Deere AT21136 suitable for John Deere - AT21136 RE27368 Main Bearing Set +0.030" - John Deere AT21136, RE27368CA$115.36 Inc VAT CA$115.36 Exc VAT1-5 days handlingPart No.1484C
Conrods
-
Conrod - RE16494 suitable for John Deere - AR71068 RE16494 RE42733 Conrod.Small End/Pin size ID: 41mm.Big End ID: 73mm.Total Length: 280mm.Centre to Centre Length: 180mm.CA$110.50 Inc VAT CA$110.50 Exc VAT1-5 days handlingPart No.76365
Conrod Bushes
-
Small End Bush suitable for John Deere - R56186 R57451 RE63913 Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mmCA$15.00 Inc VAT CA$15.00 Exc VAT1-5 days handlingPart No.1463
Conrod Bolts & Nuts
-
Connecting Rod Bolt suitable for John Deere - R516517 R80033 John Deere Connecting Rod Bolt.Genuine John Deere Part.Length:- 59MM (Measuring Underneath Bolt Head To End Of Bolt)Thread:- 7/16" UNF - 20 TPICA$10.85 Inc VAT CA$10.85 Exc VATOut of stockPart No.1491
Ancillaries Crank
Gears Crank
Crankshaft Seals
-
Rear Crankshaft Seal suitable for John Deere - AR22965 AR92893 AT22965 Rear Crankshaft Seal.External Diameter:- 146.01MMInternal Diameter:- 117.38MMWidth / Thickness:- 14.35MMCA$54.50 Inc VAT CA$54.50 Exc VAT1-5 days handlingPart No.1461 -
Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank SealCA$22.57 Inc VAT CA$22.57 Exc VAT1-5 days handlingPart No.1460
Camshaft Followers
-
Push Rod suitable for John Deere - R82896 T20310 Push RodDimensions- Overall Length: 230mm- Diameter: 8.50mmCA$23.87 Inc VAT CA$23.87 Exc VAT1-5 days handlingPart No.1503
Sump Engine
-
Sump Plug Washer - T13213 suitable for John Deere - T13213 Price is Each (Per Washer)Product Info- Inner Diameter: 22.5mm- Outer Diameter: 30mm- Thickness: 1.5mmCA$6.96 Inc VAT CA$6.96 Exc VATOut of stockPart No.1506
Bottom Gasket Sets
-
Bottom Gasket Set suitable for John Deere - Bottom Gasket SetCA$68.46 Inc VAT CA$68.46 Exc VAT1-5 days handlingPart No.1452
Air Cleaners
-
Pre Cleaner - 1693129M1 suitable for John Deere - AL39934Pre Cleaner suitable for John Deere, David Brown and Massey FergusonProduct Info- Inlet: 76mm (3")- Bowl: 178mm (7")CA$48.50 Inc VAT CA$48.50 Exc VAT1-5 days handlingPart No.2245
Air Filters
-
Fleetguard AF1839 Inner Air Filter suitable for John Deere - LAF1735 AR81913 AL27159 Inner Air FilterCA$54.50 Inc VAT CA$54.50 Exc VATOut of stockPart No.AF1839
Oil Filters
-
Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.Diameter: 94.1mm.CA$14.50 Inc VAT CA$14.50 Exc VAT1-5 days handlingPart No.8493
Fuel Filters
-
Fuel Filter suitable for John Deere - AR50041 Glass Fuel Filter- 3 Port- Overall Length: 126.5mm- Overall Width: 94mm- Overall Height: 80mmCA$53.78 Inc VAT CA$53.78 Exc VAT1-5 days handlingPart No.8494 -
Fleetguard FF5705 Fuel Filter suitable for John Deere - AL78988 Fuel Filter.Overall Length:- 103MMExternal Diameter:- 103MMFuel Fitting Diameter:- 8MMCA$25.78 Inc VAT CA$25.78 Exc VAT1-5 days handlingPart No.FF5705
Filter Kits
-
Filter Service Kit suitable for John Deere - 317mm Outer Air Filter. Contains: 1 x Oil Filter Spin On. 1 x Fuel Filter. 1 x Inner Air Filter. 1 x Outer Air Filter. John Deere. 1750 - From Serial Number 622000. 1850 - From Serial Number 622000. 1950 - From Serial Number 622000. 2250 - Fr... Show MoreCA$379.50 Inc VAT CA$379.50 Exc VATOut of stockPart No.FSK-902
Fuel Lift Pumps
-
Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass BowlGasket IncludedCA$43.40 Inc VAT CA$43.40 Exc VAT1-5 days handlingPart No.55008 -
Fuel Lift Pump suitable for John Deere - RE38009 Sofabex Version Lift Pump, Replaces plastic cap version.Gasket IncludedCA$79.56 Inc VAT CA$79.56 Exc VAT1-5 days handlingPart No.1508 -
Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.Gasket IncludedCA$58.50 Inc VAT CA$58.50 Exc VAT1-5 days handlingPart No.55016
Fuel Injectors
-
Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mmCA$0.50 Inc VAT CA$0.50 Exc VAT1-5 days handlingPart No.1512 -
Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.Seals the top of the fuel injector to the T fitting,One Required per injector, supplied as singles- OD: 13mm- ID: 9mm&n... Show MoreCA$2.75 Inc VAT CA$2.75 Exc VAT1-5 days handlingPart No.1513
Fuel Injector suitable for John Deere - AR90023 RE31757 RE37503 Fuel InjectorStanadyne brand, for Agriline brand please order 76118CA$238.68 Inc VAT CA$238.68 Exc VATOut of stockPart No.1511Fuel Pump Repair Kit
-
Fuel Lift Pump Repair Kit suitable for John Deere - RE13517 Repairs Fuel Lift Pump 1508CA$34.72 Inc VAT CA$34.72 Exc VAT1-5 days handlingPart No.1509
Fuel Ancillaries
Stop Cables
-
Engine Stop Cable suitable for John Deere - AL36923 Thread diameter 12mm. Overall Length 1350mm. Outer Cable 1300mm.CA$37.50 Inc VAT CA$37.50 Exc VAT1-5 days handlingPart No.1937
Gaskets Manifold
-
Exhaust Manifold Gasket suitable for John Deere - R521439 R90658 T20006 Exhaust Manifold GasketCA$4.50 Inc VAT CA$4.50 Exc VAT1-5 days handlingPart No.1507
Silencer Pipe
-
Silencer Pipe suitable for John Deere - AL34694 Length:1050mm. Diameter: 74mm.CA$111.15 Inc VAT CA$111.15 Exc VATOut of stockPart No.1575 -
Silencer Pipe suitable for John Deere - AL61139 Overall Length: 1085mm. Inner Collar Diameter: 75mm.CA$111.15 Inc VAT CA$111.15 Exc VATOut of stockPart No.1596 -
Silencer Pipe suitable for John Deere - AL61138 Length: 1280mm Inner Collar Diameter: 75mm.CA$195.00 Inc VAT CA$195.00 Exc VATOut of stockPart No.1598
Valves Engine
-
Inlet Valve + 0.015 suitable for John Deere - R57427 R89221 + 0.015" OversizeCA$13.92 Inc VAT CA$13.92 Exc VAT1-5 days handlingPart No.1494A -
Inlet Valve STD suitable for John Deere - R51735 R89219 Inlet Valve STDCA$13.92 Inc VAT CA$13.92 Exc VAT1-5 days handlingPart No.1494

