JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

John Deere 3000 Series 3300 Engine PARTS

Valve Springs

Valve Spring - R26125 suitable for John Deere - R26125 R504261 Valve Spring, can be used with both INLET and EXHAUST valve.

Product Info
- Overall length: 55cm
- Overall diameter: 35mm

CA$11.54 Inc VAT CA$11.54 Exc VAT

1-5 days handling

Qty

Part No.
1495

Valve Collets

Valve Collet (Pair) suitable for John Deere - T20077 Valve Collet (pair)

CA$3.25 Inc VAT CA$3.25 Exc VAT

1-5 days handling

Qty

Part No.
7407

Valve Ancillaries

Valve Stem Cap suitable for John Deere - T20129 Valve Stem Cap

OD: 13mm

ID: 9.4mm

Thickness: 6mm

CA$6.51 Inc VAT CA$6.51 Exc VAT

1-5 days handling

Qty

Part No.
1496

Valve Tappet suitable for John Deere - T20073 Valve Tappet

CA$19.53 Inc VAT CA$19.53 Exc VAT

1-5 days handling

Qty

Part No.
1502

Valve Cap suitable for John Deere - RE31617 RE37643 RE37644 Valve Cap

ID: 7.75mm

OD: 18mm

Height: 12mm

CA$6.51 Inc VAT CA$6.51 Exc VAT

1-5 days handling

Qty

Part No.
1616

Rocker Components

Rocker Arm suitable for John Deere - AT18129 AT22665 AT31250 Rocker Arm

CA$46.58 Inc VAT CA$46.58 Exc VAT

Out of stock

Qty

Part No.
1501

Studs Cylinder Head

Cylinder Head Stud (Pack of 9) suitable for John Deere - R85363 (x9) 1/2" UNC, 9 Studs Per Pack.
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4. Rotate bolt a further 60 Degrees

CA$45.00 Inc VAT CA$45.00 Exc VAT

1-5 days handling

Qty

Part No.
1464

Cylinder Head Stud - 112MM suitable for John Deere - R85363 1/2" UNC 112MM
Grade 4F.
Manufacturers recommended Torque procedure:
1. Tighten to 100Nm.
2. Tighten to 150Nm.
3. Wait 5 minutes, then re-check at 150Nm
4.Then Rotate bolt a further 60 Degrees

CA$30.99 Inc VAT CA$30.99 Exc VAT

1-5 days handling

Qty

Part No.
1464A

Cyl Block Gaskets

Complete Gasket Set suitable for John Deere - AR100418 AR68316 AR97176 John Deere. 2630 - Upto Serial Number 325067.

CA$249.55 Inc VAT CA$249.55 Exc VAT

1-5 days handling

Qty

Part No.
1640

Oil Cooler

Oil Cooler suitable for John Deere - AR64415 AR98852 RE14448 1040 - Upto Serial Number 704045. 1140 - Upto Serial Number 704045. 2150 - From Serial Number 704045. 2850 - Upto Serial Number 795106.

CA$284.98 Inc VAT CA$284.98 Exc VAT

1-5 days handling

Qty

Part No.
8066

Oil Cooler suitable for John Deere - RE38078 RE61769 1140 - From Serial Number 704046. 2850 - From Serial Number 795107. 3200 - From Serial Number 189846. 3300 - From Serial Number 189846. 3400 - From Serial Number 189846.

CA$155.14 Inc VAT CA$155.14 Exc VAT

1-5 days handling

Qty

Part No.
8089

Oil Pumps

Oil Pump Assembly suitable for John Deere - RE52020 3 Bolt fixing with modification Pipes to suit Pumps that were originally 4 Bolt

CA$354.04 Inc VAT CA$354.04 Exc VAT

1-5 days handling

Qty

Part No.
1505

Piston Engine

John Deere Piston, Ring & Liner Kit suitable for John Deere - DD11831 RE15674 RE48818 John Deere Piston, Ring & Liner Kit.

Liner Bore / Internal Diameter: 106.58mm.
Liner Flange Diameter: 125.92mm.
Liner Flange Width: 9.79mm.
Liner Overall Height: 196.93mm.
Show More

CA$225.00 Inc VAT CA$225.00 Exc VAT

1-5 days handling

Qty

Part No.
1446

Piston Rings Engine

Piston Ring Set - DD11831 suitable for John Deere - DD11831 RE15674 RE48818 No. of Rings = 3 (2.97 x 2.36 x 3.45)

Please note - These are Agriline brand for the Federal Mogul equivalent please order part number 1443FM.

CA$38.50 Inc VAT CA$38.50 Exc VAT

1-5 days handling

Qty

Part No.
1443

Liners Engine Cyl

Liner C/W Seals - R116397 suitable for John Deere - R116397 R115336 R116383 Liner which comes with sealing rings.

Dimensions as follows -
Bore diameter - 106.27mm
Flange diameter - 125.80mm
Overall height - 218.86mm
Flange width - 9.75mm
O... Show More

CA$64.47 Inc VAT CA$64.47 Exc VAT

1-5 days handling

Qty

Part No.
1604

Liner Shims & ORings

Liner Seal Kit suitable for John Deere - AR65507 Contains 3 Seals to Suit Liners 1444 & 1604

CA$7.08 Inc VAT CA$7.08 Exc VAT

1-5 days handling

Qty

Part No.
1450

Sump Gaskets

Sump Gasket Cork suitable for John Deere - R49515 R97342 R522030 Cork Alternative to 1483 (Paper)

CA$19.89 Inc VAT CA$19.89 Exc VAT

1-5 days handling

Qty

Part No.
1481

Sump Gasket Paper suitable for John Deere - R123353 R97342 R522030 Paper Alternative to 1481 (Cork)

CA$15.91 Inc VAT CA$15.91 Exc VAT

1-5 days handling

Qty

Part No.
1483

Main Bearings

Main Bearing Pair suitable for John Deere - AT21139 Flanged Bearing With Intergrated Thrust - STD.

CA$59.43 Inc VAT CA$59.43 Exc VAT

1-5 days handling

Qty

Part No.
1486

Conrod Bushes

Small End Bush suitable for John Deere - R56186 R57451 RE63913 Semi Finished. 41mm Piston Pin. Size when reamed Min/Max 41.300 - 41.330 mm

CA$15.00 Inc VAT CA$15.00 Exc VAT

1-5 days handling

Qty

Part No.
1463

Small End Bush suitable for John Deere - R51728 R55647 RE63914 Small End Bush

CA$12.50 Inc VAT CA$12.50 Exc VAT

1-5 days handling

Qty

Part No.
1462

Crankshaft Seals

Rear Crankshaft Seal suitable for John Deere - AR22965 AR92893 AT22965 Rear Crankshaft Seal.

External Diameter:- 146.01MM
Internal Diameter:- 117.38MM
Width / Thickness:- 14.35MM

CA$54.50 Inc VAT CA$54.50 Exc VAT

1-5 days handling

Qty

Part No.
1461

Front Crank Seal suitable for John Deere - AR67942 AT21608 Front Crank Seal

CA$22.57 Inc VAT CA$22.57 Exc VAT

1-5 days handling

Qty

Part No.
1460

Camshaft

Camshaft suitable for John Deere - R82820 Camshaft

CA$326.20 Inc VAT CA$326.20 Exc VAT

Out of stock

Qty

Part No.
7586

Camshaft Followers

Push Rod suitable for John Deere - R82896 T20310 Push Rod

Dimensions

- Overall Length: 230mm
- Diameter: 8.50mm

CA$23.87 Inc VAT CA$23.87 Exc VAT

1-5 days handling

Qty

Part No.
1503

Sump Engine

Sump Plug Washer - T13213 suitable for John Deere - T13213 Price is Each (Per Washer)

Product Info
- Inner Diameter: 22.5mm
- Outer Diameter: 30mm
- Thickness: 1.5mm

CA$6.96 Inc VAT CA$6.96 Exc VAT

Out of stock

Qty

Part No.
1506

Bottom Gasket Sets

Bottom Gasket Set suitable for John Deere - Bottom Gasket Set

CA$286.28 Inc VAT CA$286.28 Exc VAT

1-5 days handling

Qty

Part No.
2552

Air Filters

Fleetguard AF25555 Outer Air Filter suitable for John Deere - RE62220 RT6005011111 KV16429 Outer Air Filter

CA$74.50 Inc VAT CA$74.50 Exc VAT

1-5 days handling

Qty

Part No.
AF25557

Oil Filters

Oil Filter Spin On suitable for John Deere - RE504836 RE507522 Oil Filter Spin On

- Outer Diameter: 93mm (3.66'')
- Overall Length: 155mm (6.10'')
- Thread Size: M92 x 2.5

CA$47.06 Inc VAT CA$47.06 Exc VAT

1-5 days handling

Qty

Part No.
10212

Oil Filter Spin On suitable for John Deere - AR58956 T19044 Length: 136.7mm.
Diameter: 94.1mm.

CA$14.50 Inc VAT CA$14.50 Exc VAT

1-5 days handling

Qty

Part No.
8493

Fuel Filters

Fuel Filter suitable for John Deere - AR50041 Glass Fuel Filter

- 3 Port
- Overall Length: 126.5mm
- Overall Width: 94mm
- Overall Height: 80mm

CA$53.78 Inc VAT CA$53.78 Exc VAT

1-5 days handling

Qty

Part No.
8494

Fleetguard FF167 Fuel Filter suitable for John Deere - AT17387 Fuel Filter

International Dual Fuel Filter System Upto Serial Number 318209

CA$15.75 Inc VAT CA$15.75 Exc VAT

1-5 days handling

Qty

Part No.
FF167

Fleetguard FS19831 Fuel Filter suitable for John Deere - RE503254 RE50455 RE62418 Overall height: 135mm, OD: 84mm, Inside Ø - End 1: 17mm, Inside Ø - End 2: mm.

CA$67.63 Inc VAT CA$67.63 Exc VAT

1-5 days handling

Qty

Part No.
FS19831

Fuel Lift Pumps

Fuel Lift Pump w/ Glass Bowl suitable for John Deere - DD13483 DD14292 RE27667 Fuel Lift Pump w/ Glass Bowl
Gasket Included

CA$43.40 Inc VAT CA$43.40 Exc VAT

1-5 days handling

Qty

Part No.
55008

Fuel Lift Pump suitable for John Deere - DD13483 DD14292 RE27667 Replacement for original Sofabex or Corona style Lift Pumps.
Gasket Included

CA$58.50 Inc VAT CA$58.50 Exc VAT

1-5 days handling

Qty

Part No.
55016

Fuel Injectors

Fuel Injector suitable for John Deere - RE36939 RE38087 SE501097 Fuel Injector
Injector Nozzle marked with - 28485

CA$98.50 Inc VAT CA$98.50 Exc VAT

1-5 days handling

Qty

Part No.
9487A

Injector Line Seal suitable for John Deere - R51936 I/D : 6.2mm
O/D : 10.5mm
Height : 5.8mm

CA$0.50 Inc VAT CA$0.50 Exc VAT

1-5 days handling

Qty

Part No.
1512

Injector Seal - R79605 suitable for John Deere - R79605 T29539 Tee Fitting Washer.

Seals the top of the fuel injector to the T fitting,

One Required per injector, supplied as singles

- OD: 13mm
- ID: 9mm&n... Show More

CA$2.75 Inc VAT CA$2.75 Exc VAT

1-5 days handling

Qty

Part No.
1513

Fuel Ancillaries

Fuel Shut Off Solenoid suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid

CA$76.50 Inc VAT CA$76.50 Exc VAT

1-5 days handling

Qty

Part No.
2073

Fuel Shut Off Solenoid - RE22744 suitable for John Deere - RE22744 RE54064 Fuel Shut Off Solenoid

Fuel Thread OD: 13.7mm

CA$42.50 Inc VAT CA$42.50 Exc VAT

Out of stock

Qty

Part No.
2074