Case International C Series C80 Electrical PARTS
Starter Motors
-
Gear Reduction Starter Motor 12V, 3.2Kw (Mahle) suitable for Case International - Length from Front Mounting Face to Rear mm
Total Length 304.8mm
Teeth: 10
Tooth Pitch: 15.42mm
Flange Ø: 89mm
Mounting Angle: -42°
Number Of Mounting Bores: 3
Mounting Points Diameter: 127mm
Bore Ø 1: 10.9mm
Rotatio... Show MoreCA$906.39 Inc VAT CA$906.39 Exc VATOut of stockPart No.81277 -
Starter Motor - 12V, 2.8Kw (Mahle) suitable for Case International - 234987A1 73326810 Teeth: 10
Tooth Pitch: 15.42mm
Flange Ø: 89mm
Mounting Angle: -40°
Number Of Mounting Bores: 3
Mounting Points Diameter: 127mm
Bore Ø 1: 10.9mm
Rotation Direction: Clockwise
For Flywheel Depth: 32.5mm
CA$768.51 Inc VAT CA$768.51 Exc VATOut of stockPart No.93016 -
Starter Motor - Gear Reduction suitable for Case International - Massey Ferguson 4.2kw Gear reduction, provides greater power than original starter. Length from flange to end when fitted = 255mm.Iskra PLGR Type Starter Motor.12V. 10 Teeth. 4.2kw.CA$451.36 Inc VAT CA$451.36 Exc VATOut of stockPart No.52702
-
Gear Reduction Starter Motor 12V, 3.2Kw (Mahle) suitable for Case International - 1447834M91 3542185M93 3667037M91 Teeth: 10
Tooth Pitch: 15.42mm
Flange Ø: 89mm
Mounting Angle: -40°
Number Of Mounting Bores: 3
Mounting Points Diameter: 127mm
Bore Ø 1: 10.9mm
Rotation Direction: Clockwise
For Flywheel Depth: 32.5mm
CA$845.84 Inc VAT CA$845.84 Exc VAT1-5 days handlingPart No.81134
Alternator
-
Alternator 14V, 70 Amps (Mahle) suitable for Case International - Mounting Angle: 60°
Rotation Direction: Clockwise
Bore Ø: 8.2mm
Mounting Bores Distance: 82mm
Mounting Points Diameter: 86mm
CA$536.19 Inc VAT CA$536.19 Exc VAT1-5 days handlingPart No.72312
Sensors
-
PTO Neutral Switch - 177500A2 suitable for Case International - 177500A2 Original OEM Quality -Show MoreCA$131.27 Inc VAT CA$131.27 Exc VATOut of stockPart No.76083
Number Plate Lamps
-
Number Plate Lamp suitable for Case International - 3053400R92 Number Plate LampCA$25.10 Inc VAT CA$25.10 Exc VAT1-5 days handlingPart No.8220
Beacons
-
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.CA$19.92 Inc VAT CA$19.92 Exc VAT1-5 days handlingPart No.8450 -
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
CA$17.09 Inc VAT CA$17.09 Exc VAT1-5 days handlingPart No.8451 -
Rotating Warning Beacon suitable for Case International - For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 60mm.
Diameter: 125mm.
12V H1 Halogen Bulb.12V / 55W , 24V / 70W.
Impact Resistant Lens.
CE Approved.
Replacement Bulb - Agriline Ref: 9368<... Show MoreCA$72.50 Inc VAT CA$72.50 Exc VAT1-5 days handlingPart No.54028
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
CA$24.07 Inc VAT CA$24.07 Exc VAT1-5 days handlingPart No.8452
Transmission Switches
-
4WD Solenoid Valve - Transfer Box - 81870291 suitable for Case International - 139307A14WD Solenoid ValveProduct Info- Genuine ItemCA$325.00 Inc VAT CA$325.00 Exc VATOut of stockPart No.80251