Case International B Series B414 Electrical PARTS
Ignition Switches
-
Premium Ignition Switch, Heat and start suitable for Case International - 3048227R92 Premium Quality ignition switch,Heat and start, 4 terminals.CA$52.00 Inc VAT CA$52.00 Exc VATOut of stockPart No.74911
Wiring Looms
-
Wiring Harness B250 B275 B414 suitable for Case International - Suitable for models with lever type starter motor.CA$104.50 Inc VAT CA$104.50 Exc VAT1-5 days handlingPart No.5018
Starter Motors
-
Starter Motor suitable for Case International - Lucas M45 Type.
12V.
2.2 kW.
LH Fit.
Fitting: 3 Hole.
Flange RH Opening.
Teeth: 10.
CA$347.20 Inc VAT CA$347.20 Exc VAT1-5 days handlingPart No.8021 -
Starter Motor suitable for Case International - 704447R94 Early IHC Lever Type (1958 - 1964)Supplied With Rubber Boot Which Sits Over The Top Of The Lever.CA$395.00 Inc VAT CA$395.00 Exc VATOut of stockPart No.8153
Starter Accessories
-
Contact Switch Starter Motor suitable for Case International - Contact Switch Starter MotorCA$32.50 Inc VAT CA$32.50 Exc VAT1-5 days handlingPart No.5063 -
Rubber Boot - Starter suitable for Case International - Made from Synthetic durable rubberCA$30.00 Inc VAT CA$30.00 Exc VAT1-5 days handlingPart No.5191
Dynamos
-
Tractor Dynamo suitable for Case International - 3049871R91 K908882These 12V dynamo are a direct replacement for the Original Lucas C40 dynamo, with a single spade on the rear and a lug on the side.
These dynamos have been redeveloped to be fully weather proof; the positi... Show More
CA$198.50 Inc VAT CA$198.50 Exc VAT1-5 days handlingPart No.5297
Dynamo Pulley
-
Dynamo Belt - A29 suitable for Case International - 70444R1 709449R1Dynamo Belt - A29 typeSuitable for Case IH - Dynamo BeltType: SmoothDimensionsOutside Length: 787mmInside Length: 735mmTop Wid... Show MoreCA$15.00 Inc VAT CA$15.00 Exc VAT1-5 days handlingPart No.8019A
Heater Switches
-
Resistor suitable for Case International - 3042230R91 703557R92 706685R92 ResistorDimensions / Spec- 2 Ohm- Fitting Diameter: 25.40mm- Overall Length: 56.3mmCA$45.00 Inc VAT CA$45.00 Exc VAT1-5 days handlingPart No.8072
Heater Plug
-
Glow Plug - 710348R1 suitable for Case International - 710348R1Glow PlugDimensionsThread: No.18 BS Spark Plug. 18mm x 1.5 PitchNote that these must be wired in seriesCA$29.50 Inc VAT CA$29.50 Exc VAT1-5 days handlingPart No.5721
Solenoid
-
Solenoid suitable for Case International - 12V SolenoidMounting Centers: 40mmCA$36.00 Inc VAT CA$36.00 Exc VAT1-5 days handlingPart No.5171 -
Starter Solenoid suitable for Case International - Genuine Lucas.CA$57.50 Inc VAT CA$57.50 Exc VAT1-5 days handlingPart No.9029
Condensor
Contact Sets
Rotor Arms
Horn
Horn Button
-
Horn Button suitable for Case International - Horn Button2 TerminalFitting Diameter: 19mmCA$15.00 Inc VAT CA$15.00 Exc VAT1-5 days handlingPart No.5120 -
Horn Button suitable for Case International - Genuine Lucas.CA$86.03 Inc VAT CA$86.03 Exc VATOut of stockPart No.9049
Gauges
-
Oil Pressure Gauge B275 B414 B434 suitable for Case International - Case/IH. B275 - From Serial Number 8523 OnwardsDimensions- Body OD: 51.80mm- Bezel OD: 57mm- Thread OD: 9.5 - 10.2mm<... Show MoreCA$58.50 Inc VAT CA$58.50 Exc VAT1-5 days handlingPart No.5054
Water Temp Gauge suitable for Case International - Water temp gaugeDimensions- Body OD: 52mm- Bezel OD: 57mm- Wire Length: 190cm- Sender Thread OD: 15.3mm&... Show MoreCA$48.50 Inc VAT CA$48.50 Exc VAT1-5 days handlingPart No.5055Tachometers
-
Tachometer suitable for Case International - Tachometer Later TypeCA$84.50 Inc VAT CA$84.50 Exc VAT1-5 days handlingPart No.8167 -
Tachometer B275 B414 3045066R92 suitable for Case International - 3045066R92 Tachometer Early Type Use Tachometer Cable 9054CA$65.00 Inc VAT CA$65.00 Exc VAT1-5 days handlingPart No.5126
Tachometer Cables
-
Tachometer Cable suitable for Case International - 3042473R91 Tachometer Cable Suits 5126 - Early Type Tachometer Length: 930mm Thread: M12 - M12CA$45.00 Inc VAT CA$45.00 Exc VAT1-5 days handlingPart No.9054
Number Plate Lamps
-
Number Plate Lamp suitable for Case International - 3053400R92 Number Plate LampCA$25.10 Inc VAT CA$25.10 Exc VAT1-5 days handlingPart No.8220
Light Switches
-
Light Switch & Knob as Original - 882283M1 suitable for Case International - 3107344R91 Light Switch & Knob as Original7 Terminal (3 Double, 1 Single)13.5mm Fitting Diameter.CA$24.50 Inc VAT CA$24.50 Exc VAT1-5 days handlingPart No.5377
Headlights
-
Headlights - Side Mounting suitable for Case International -Diameter: 150mm.
Depth: 120mm.
Supplied as a pair.
These lights are exclusive to Agriline; we have worked... Show More
CA$115.00 Inc VAT CA$115.00 Exc VAT1-5 days handlingPart No.6200
Headlight Spares
-
Bulb 12V 5W BA15D SBC G18.5- Single suitable for Case International - Side/Indicator bulb ECC Approved.CA$0.91 Inc VAT CA$0.91 Exc VAT1-5 days handlingPart No.9365 -
Bulb 12V 5W BA15D SBC G18.5- Box 10 suitable for Case International - Side/Indicator bulb ECC Approved.CA$7.96 Inc VAT CA$7.96 Exc VAT1-5 days handlingPart No.9365A
Side Lamps
-
Butler Side Light suitable for Case International - Models With Round Fenders.
Supplied With Bulb.CA$35.00 Inc VAT CA$35.00 Exc VAT1-5 days handlingPart No.5029
Beacons
-
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 95mm.
Fixing Hole : 8mm
Fixing Holes Centre to Centre: 38mm.CA$19.92 Inc VAT CA$19.92 Exc VAT1-5 days handlingPart No.8450 -
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 55mm.
CA$17.09 Inc VAT CA$17.09 Exc VAT1-5 days handlingPart No.8451 -
Rotating Warning Beacon suitable for Case International - For Negative Earth Tractors
Fixed Pin Fitting.
Pin Fitting : 24mm.
Overall Height: 60mm.
Diameter: 125mm.
12V H1 Halogen Bulb.12V / 55W , 24V / 70W.
Impact Resistant Lens.
CE Approved.
Replacement Bulb - Agriline Ref: 9368<... Show MoreCA$72.50 Inc VAT CA$72.50 Exc VAT1-5 days handlingPart No.54028
Beacon Bracket suitable for Case International - Supplied with weather rubber cap for when beacon not in place.
Anodised plating for weather resistance.
Pin Height: 100mm.
Fixing Slots: 11mm x 22mm,
Fixing Slots Centre to Centre: 80mm.
CA$24.07 Inc VAT CA$24.07 Exc VAT1-5 days handlingPart No.8452



